FAQs

Hardly any, good for a century, can be water washed every 5-10 years,bricks have minimum maitainace if they are used correctly... the life of brick cant more than couple of century if used in ideal way
brick are as good as how they are used and applied in a design
bricks do age but with age they look beautifull
its called weathering
everything around us gets old, and with age things looks more beautifull
if u see even buy expesive jeans from levis they wash it look old weatehred aged look
today people want rustic and variations still they contradict nature by beliveing a product should never get old, lot of people apply sealnts on brick to give it protective layer protecting from asbrobing exess water or dust

Lot of people apply sealnts on brick to give it protective layer protecting from asbrobing exess water or dust

Yes brick can be replaced in wall or cladding format also i will send u video to refer..

Painting a brick itslef is not recommeded by jjb and so recommding paint for is out of question. any paint will surviuve on bricks but incase of mositure from anyside will dampen the the the face in time to come.. no issue in interior for the matter..

Facing bricks are full bricks can make walls, cladding is done for glueing (cladded ) on walls

Made for special cases only, rarely, depends on quantity, time of order.

faqAnswer

differs from bricks to bricks, 90% brick of ours absorb upto 12% water. some brick like ct6 london stocks aborb upto 20% water.

hardly any, good for a century, can be water washed every 5-10 years,bricks have minimum maitainace if they are used correctly... the life of brick cant more than couple of century if used in ideal way brick are as good as how they are used and applied in a design bricks do age but with age they look beautifull its called weathering everything around us gets old, and with age things looks more beautifull if u see even buy expesive jeans from levis they wash it look old weatehred aged look today people want rustic and variations still they contradict nature by beliveing a product should never get old, lot of people apply sealnts on brick to give it protective layer protecting from asbrobing exess water or dust

lot of people apply sealnts on brick to give it protective layer protecting from asbrobing exess water or dust

yes brick can be replaced in wall or cladding format also i will send u video to refer..

painting a brick itslef is not recommeded by jjb and so recommding paint for is out of question. any paint will surviuve on bricks but incase of mositure from anyside will dampen the the the face in time to come.. no issue in interior for the matter..

facing bricks are full bricks can make walls, cladding is done for glueing (cladded ) on walls

made for special cases only, rarely, depends on quantity, time of order.

in tile business its called in grouting but in brick business its called brick poiting, some people and some agencies use artifical grouts to to fill up the joints for ease however best traditional brick work are done with correct proportion of cement and sand in this type of sand also have imp role to play to derive a particualr texture, however jointless withoit grouting also is done at many places but most of the brick are not absoutley right stright so even when there is no space is kept between the bricks there will be few mm space anyways as the bricks are naturaly not righ anagle... lot of modern strrcuers do brick cladding without joint i will share with you images on whats app to see and understand. Jointless application is very popualr with designers who look for contemprory look in the brick work. Grouting is compulsory in full brick wall but in cladding grouting is not compulsory.

There are many ageicnes doing work in baroda and aroud, vinodbhai, balwantbhai, chiragbhai etc, who does is not imp but more imp is they carry out the work as idealy like we have brick on our panel tell customer

Thats secret however JJB manges to between 3 to 4 cladding bricks from one brick which is rare no brick makers do it or able to acheive it, we have REV series which are 3 and 4th sides of brick however this si not be shared with end consumers or clients. by this proces 85% product is used and rest 15% wstage is crushed and recyled and mixed with brick material again.

Jute finish yellow, jute finish red, jute finish black, wood finish, tukish rev, rev serises brick only available in cladding.

E2 was previously structurcal brick so structural brick dont have cladling version, however soon e2 strucral brick is going to be realced in catlogs, e3 is block so again there cannot be cladding versopn of hollow block.

Cladding brick

Weathred look

Lite Weathed

flush pointing i am sending u link to understand... see our website u find there diff types of pointing. flush pointing is simple it not deeper than bricks. cememt pointing will be in face of brick surface.

linea stands for linear bricks.. bricks which are 50 mm height and 300 mm + length, some linea brick also come upto 500 mm in length we are devloping them.

for every panel at tbs baroda we have alredy submited names and discriptions so question is irrlevant

website is not updated

gramticaly inccorect question, not able to understand the question.

we dont have hard copy as of now, u can share with via email soft copies of ebrochuers

Tradional series is handmade, extruded series is machinemade, infact our positioning clearly defines them

good bricks are result of more than few materials and clays combined, as per the look and attributes of bricks, a right mix of receipe is designed with various combinations of clays, sands, minerals, oxides and somtimes bio fuel or coal etc.

clays come from different parts of the conuntry, average dispatnce is 400Km from where clay comes, also at times caly come imported too but rare.

Yes they are made adding some chemicals and they look like dark yellow in look and somtimes architect even use them as facing bricks But they are not good with water and rains Also refractory bricks still people use for interior bricks in walls many designers Refractory bricks are made with harmful chemicals and are full kilns ovens and industrial use Kids at home and other people when touch refractory bricks it’s not advisable however some designers ignore and still use them for decorating

Globally (In developed worlds ) Structure Bricks are called moreover Enginering bricks Enginering bricks - This bricks are used for various applications for buildings bridges or any contraction. This bricks should have strength 250kg cm2 and upto 400kg cm 2 or more depending which class of Enginnering bricks they need. Size Tolerances of Enginnering bricks are minimum compare to facing bricks and Enginnering or structural bricks should be more accurate. Facing bricks in developed world are bricks have different standards and diff classes - class 1 class 2 class 3, etc Facing bricks have strength and density as per thier class and manufacturer has to declare his bricks comes under which class so customer can decide if the specs are ok for his applications (I will send u sheet of different standards of bricks in Europe and Uk) In india (Is standards) structure bricks is 75kg cm2 and water absorbtion should be 10 to 15% however most of the bricks that u see in markets around street being used for construction are 50kg cm2 and have 20% + water absorption, not even 1% site any standards are being followed Result is anything built in india does have life more than 25 to 30 years in reality but it’s stretched somehow... no current building in india can be used after 40 years max. In Europe basic life of building is 100 years and can be extended upto multiple years if it taken care which is not the case in india Europe still builds with bricks and roofing tiles... they use bricks with top quality and thier contruction and standards are not comparable to our Indian standards In india general mindset is just strength and porosity (water absorbtion) but brick in developed namtions are tested with more complex techniques to see weathering effects it will face like frost test etc Facing bricks has to see lot of harsh weather and heat cold for ages... in winter Paris’ is minus and today it is 45 degree so difference of 50 degrees and this delta on exterior products is harsh and if the quality of bricks is not good it will start degrading. In india delhi is 45 degree in summer and at winters is 2 to 3 degree at times so this difference in temperature require bricks to be really good quality or else it will show weathering and stress on brick body.

Structure bricks in india have very poor standards - people use any scrap to build houses and buildings in European context structural bricks are with strength of 300 + kg cm2 and India has a standard which is very poor around 75kg cm2. So there is no comparison. In simple words - facing bricks should have good Strength and good density to cope up with heavy rains and weather and also should look good

DB was for Deboer It’s machine which makes this type of texture DB is for our internal understanding we kept

type of pointing are avaiable on internet and our website.

just different size and format

refer our website anywater struck product and see the discription what it is

cladding bricks are also called brick vinners, brick slips, brick tiles, etc

life any strcuture depends on its raw material quality, design and contruction pratices, there brick projects which 500 to 800 years old also.

see on youtube this bcoz to explain this as good i explain how to swim or how to drive a car, this things need pratcial eye and no text can teach this.

what is dry wall i dont know

bricks are manuafctuered at 1000 to 12000 degree so somthing which is alredy fired and fused is definately fire resitant and as far weather resitant is conerned they are most reilable building since 5000 years of human civilisation.

yes they good sound insualtion property due to clay.

sky is the limit, bricks are as good as how u can play with them, its like lego

Bricks are one of the cheapest manufactuered construction materail till date if seen per kg.. if compared to any facade materail like, paint, alluminium, Wood, steel, glass, stone, texture, ACP

Its normaly once lifetime, unless joint has has worn out it happens over 50 yeard or more time.

No

The product is currently undergoing testing for R-Values for GRIHA code compliance- Its is common knowledge that clay products are excellent insulators and very well compliant with green building norms due to one of the lowest carbon foot print, the carbon emissions per kg of manufactured clay products is one of the lowest in the building materials *The material can certainly tailor made to dry clad on AAC blocks given that the client has the required budget, it is common knowledge that dry cladding is 2-3 times more expensive then traditional cladding due to requirements of aluminum/galvanized iron support systems

This reason is for internal matter and to be discussed with customers, Bricks with round hole were 2.8kg and bricks with square hole is 2.25, extruded bricks are with holes bco it helps in less clay, faster dryer, faster drying and less energy, cheaper transport due to less weight and it is win win situation for customer and manufacturer, same area is covered and bricks are made cheaper. in modern brick making Extrusion is not only selling bricks but how much air u sell.. perforations is air. So in modern Bricks world perforations can be 70% also and 30% clay but those levels are achieved gradually with market accepting perforation. More perforations is good it’s light weight and less steel required in building as it reduces overall dead weight. We want to supply e1 to Banglore transport can cost 12 rs per Bricks is it is 2.8 kg and if it’s 2.25 that is square hole it can cost 10 rs per Bricks. Higher the perception better clay, better process and better machines are needed to produce such sophisticated products.

Yes jute finishes bricks dimensions are slim.. between 45 mm to 60 mm depends which product and lot is chosen.

Chotha hathi can load 1000 kg in Normal course and if overloaded 1200 kg ( so that is 1500 to 1600 pcs of cladding or full bricks 300 to 400 pcs.

Sand textured extruded bricks on shelf, sanded London stock, etc

If u say yes from first minute for urgent delivery than customer will understand it’s possible demand urgent delivery even if he does not have urgency that is a tendency in India, our first response should be it’s unlikely and we don’t have scope of urgent orders as factory has too many pending orders, once customer is adamant and seems it real urgency than only we should work for him and discuss with factory, always customer has to be showen customer we are very busy company and it’s not very usual to expect urgent delivery. Even if we do customer should feel like it is special case, it’s tactic I will explain u over the phone more better.

Perforate for solid Bricks are generally better horizontally and more stable compare to vertical application. 99.99% bricks are used horizontal and in some cases where architect wants to do vertical brick design than he may do by proper load and stability calculations.

With modern adhesives and chemicals u can glue bricks anywhere there are many types of glues.

Possible if it is done well as cladding bricks are sensitive and should be done very gently and properly. Drilling in bricks is not so easy.

NO proper white bricks we have them yet... we made few this year they were slightly creamish but not swan white yet.

L-corners for Jute bricks are usually smaller in size, the consumption of these will change as well for one running foot. avoid pitching L-corners for Jute claddings.

yes, but the quantity should be more than 60m bricks

Brick being a bulky product we normally supply to end customers directly without any dealers or distributors which also benefits the end user as there are no middleman margins.

Role of LRSOOD is to Manufacture & supply Bricks.

Facing bricks , exposed bricks or elevation bricks have the same meaning, here bricks are just not meant for structural purpose but also serve the role in elevation and in the looks of the building.